Start with the wall area, not the color
Before you fall for the brushed anthracite finish, measure the wall you plan to cover. The Fish Scale 3D Anthracite panel is 11.73 in long and 11.34 in wide, with 0.93 sq ft of coverage per panel. That number is the one that decides how many boxes you need, not the visual drama of the fish scale pattern.
For a typical kitchen backsplash, divide your total square footage by 0.93 and round up. Add a little extra for cuts around outlets, corners, and the ends of the run. Because each panel is a single mosaic piece with relief, you are not laying individual tiles, so waste usually comes from trimming whole panels rather than breaking small pieces.
Panel facts that affect your order
- Peel and Stick Backsplash | Fish Scale 3D Anthracite | 11.73×11.34": Length 11.73 in, width 11.34 in, coverage 0.93 sq ft per panel. Use these numbers to calculate panel count for your backsplash or accent wall before ordering.

Peel and Stick Backsplash | Fish Scale 3D Anthracite | 11.73×11.34" - Peel and Stick Backsplash | Fish Scale 3D Anthracite | 11.73×11.34": Thickness approx. 0.2 in with 3D relief. The relief creates the fish scale shadow effect, but it also means the panel sits slightly proud of the wall, which matters at edges and around trim.
- Peel and Stick Backsplash | Fish Scale 3D Anthracite | 11.73×11.34": Weight approx. 0.79 lbs per panel. Lightweight panels are easier to handle during a DIY install, especially overhead or on a tall backsplash.
Where anthracite fish scale earns its place in a dark kitchen
Dark cabinets need a backsplash that adds depth without disappearing. The anthracite tone with a brushed effect gives the Fish Scale 3D panel a metallic sheen that catches light across the curved scales, so the wall reads as a textured surface rather than a flat dark block. In a black or charcoal kitchen, that movement keeps the room from feeling heavy.
The fish scale shape is organic and lively, which suits modern and transitional kitchens better than a rigid grid. If your cabinets are flat and minimal, the pattern adds character. If your kitchen already has a lot of pattern or ornate hardware, the same panel can compete for attention. Use it as a full backsplash for a bold statement, or as an accent behind a cooktop or bar area where the 3D relief can be the focal point.
Heat, moisture, and daily cleaning
- Behind the cooktop: The supplied information states the panels are heat resistant and suitable behind cooktops. That makes them a practical choice for a kitchen backsplash, but always follow your local building and appliance guidance for clearance around heat sources.
- Near sinks and showers: The panels are moisture resistant and suitable near sinks and showers. In a bathroom or powder room, the brushed aluminum surface can handle steam and splashes, and it wipes clean with a damp cloth.
- Scratches and wear: The metal top layer is scratch-resistant and designed to protect against daily wear. Avoid abrasive cleaners that could dull the brushed finish, and stick to a damp cloth for routine cleaning.
- Color stability: The anodized aluminum is colorfast and resistant to fading or oxidizing, according to the supplied information. That matters in a dark kitchen where a fading accent would be obvious.
Installation reality: no grout, no tools, but prep matters
The appeal of this panel is speed. It has a strong self-adhesive backing, so you do not need glue, sealant, or grout. The supplied steps are simple: clean the wall, peel off the protective film, and press the panel firmly into place. Each panel is a complete mosaic of scale-shaped tiles with relief, so there are no individual tiles to set.
That said, the wall itself has to be clean and sound for the adhesive to hold. The supplied information does not specify which wall substrates are approved or how to treat uneven surfaces, so check your wall condition before ordering. If your wall has loose paint, heavy texture, or previous grease buildup, address that first. The panels are not a shortcut for a failing wall.
Adhesive and installation facts
- Peel and Stick Backsplash | Fish Scale 3D Anthracite | 11.73×11.34": Strong self-adhesive backing; no glue, sealant, or grout needed. This is a genuine DIY-friendly feature, but it also means the adhesive is the critical failure point if the wall is not properly prepared.
- Peel and Stick Backsplash | Fish Scale 3D Anthracite | 11.73×11.34": Easy installation: clean the wall, peel off the protective film, press onto the wall. The process is fast, but it assumes a clean, suitable surface. Do not skip the cleaning step.
- Peel and Stick Backsplash | Fish Scale 3D Anthracite | 11.73×11.34": Mosaic structure on one panel: scale-shaped tiles with relief in one piece. You get the look of individual fish scale tiles without the labor of laying and grouting each one.
Fish scale anthracite vs other peel and stick backsplashes
If you are choosing between this and a flatter, more conventional peel and stick tile, the trade-off is visual impact versus subtlety. The 3D relief and metallic finish are the main reasons to choose this panel; they are also the reasons it may not suit every kitchen.
- Fish Scale 3D Anthracite: Best for dark kitchens that need texture and light play. The brushed anthracite finish is bold and modern, and the fish scale pattern adds movement. It is heat and moisture resistant, and it installs without grout.
- Flat subway or picket tile: A safer choice if you want a quieter backsplash that blends with busy cabinets or patterned countertops. Flat tiles can be easier to cut around outlets and corners, though they may require grout depending on the product.
- Light or bright peel and stick tile: If your dark kitchen feels too dim, a lighter backsplash can lift the room. Anthracite will not brighten the space; it adds depth and drama instead.
The honest trade-offs before you commit
The Fish Scale 3D Anthracite panel is a strong choice for a dark kitchen that needs a focal point, but it is not a neutral backdrop. The metallic finish and 3D relief show imperfections in installation more than a flat matte tile would, so take your time aligning panels and pressing them firmly.
Also consider the edges. The supplied information does not include matching edge trim or end pieces for this panel, so plan how you will finish exposed edges at the end of a run or around a window. A clean cut and a bead of suitable sealant may be needed, but check what your installer recommends for your specific wall.
Finally, order a little more than your calculated coverage. The 0.93 sq ft per panel is precise, but cuts and mistakes happen. Having one or two spare panels on hand saves a second order and helps with future repairs.
Product facts for your buying decision
- Peel and Stick Backsplash | Fish Scale 3D Anthracite | 11.73×11.34": Anthracite with brushed effect; fish scale shape with 3D relief. This is the visual core of the product. Make sure the metallic, textured look suits your kitchen lighting and cabinet finish.
- Peel and Stick Backsplash | Fish Scale 3D Anthracite | 11.73×11.34": Heat resistant (suitable behind cooktops) and moisture resistant (suitable near sinks and showers). These are the two most common backsplash zones, so the panel is suitable for typical kitchen and bathroom applications.
- Peel and Stick Backsplash | Fish Scale 3D Anthracite | 11.73×11.34": Scratch-resistant surface, easy to clean with a damp cloth. Low maintenance is a real advantage in a busy kitchen, but avoid abrasive cleaners to preserve the brushed finish.
- Peel and Stick Backsplash | Fish Scale 3D Anthracite | 11.73×11.34": Colorfast anodized aluminum; does not crack or peel off. Durability matters in a dark kitchen where fading or peeling would be highly visible.


